| Product features: | Application: |
| Low insertion loss | Fiber Laser |
| High return loss | Fiber amplifier |
| High extinction ratio | Test system |
| High isolation |
|
| High stability and reliability |
|
Specification
| Parameters | Unit | Value |
| Single / Dual stage | - | Single Stage | Dual Stage | Single Stage | Dual Stage |
| Signal Channel | Signal Wavelength Tolerance | nm | 1064±10 | 1550±15 |
| Max. Insertion Loss | dB | 2.6 | 3.8 | 0.9 | 1 |
| Typical signal reverse peak isolation (23℃) | dB | 40 | 52 | 40 | 52 |
| Minimum signal reverse isolation (23℃) | dB | 28 | 45 | 28 | 45 |
| Min.Isolation (Com to Pass @Reflection band) | dB | 30 |
| Min. Extinction Ratio (23℃) | dB | 20 |
| Reflection Channel | Reflection wavelength range | nm | 960~990 |
| Max. Insertion Loss | dB | 0.6 |
| Min. Isolation(Com to Ref @Transmission spectrum) | dB | 15 |
| Min. Extinction Ratio(23℃) | dB | 18 |
| Min. return loss | dB | 50 |
| Maximum insertion loss stability | dB/℃ | 0.005 |
| Max. Handling Power (CW) | mW | 300 |
| Max. pull force | N | 5 |
| Working temperature | ℃ | -5~+70 |
| Storage temperature | ℃ | -40~+85 |
For the devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower for each connector added. Connector key is aligned to low axis.
PMIWDM-1111-234-555-666-78-9-AAA
| 1111 - Center Wavelength: | 0698=T1064nm/R980nm; 5598=T1550nm/R980nm |
| 2 - Single / Dual stage: | S=Single Stage, D=Dual Stage |
| 3 - Pump Type: | F=Forward Pump, B=Backward Pump |
| 4 - Signal channel working axis: | B=Both axis working, F=slow axis working / fast axis blocked |
| 555 - Fiber Type(Com & Pass): | 001=PM1550, 003=PM980, SSS=Customize |
| 666 - Fiber Type(Ref): | 001=PM1550, 003=PM980, 004=HI1060, 008=SMF-28E, SSS=Customize |
| 7 - Package Dimension: | 0=φ5.5x35mm, S=Customize |
| 8 - Fiber Pigtail Type: | 0=Bare Fiber, 1=900μm Loose Tube |
| 9 - Fiber Pigtail Length: | 0.75=0.75m, 1.0=1m, 1.5=1.5m, S= Customize |
| AAA - Connector Type: | 0=FC/UPC, 1=FC/APC, 2=SC/UPC, 3=SC/APC, N=No Connector, S=Customize |